FCS003
- Self-powered cuts installation and operating costs
- Safe and reliable
- Easy for installation
- Solid-state switch for control circuits up to 2.5A @ 120 VAC/DC
- Designed to meet CSA approval
- The shell is made of ABS (UL 94V-0)
- Designed to meet CSA approval
- The shell is made of ABS (UL 94V-0)
- Designed to meet CSA approval
- The shell is made of ABS (UL 94V-0)
- Adjustable set trip point from 0.5 to 50A
- Power MOS act as a switch device in the designed of the switch
- The number of startup is not limited
- The response time of the switch less than 200ms
- Solid-core or split-core design, the isolation voltage up to 2000V
- Product SKU: FCS003
- Category:New Products,Sensors
- Contact for high volume orders (25 or more) for special pricing
Series FCS AC Current Switch for Furison
The series FCS003 current switch was designed for monitoring AC. By sensing AC, this device controls AC load on motor, relay, lighting, fan, and applicably monitored circuit, together with contactor. Input passing through current rang 1.2-- 40A, and maximum voltage load up to 120V/2.5A. Delay module was Incorporated into the circuit for 5, 10, 15 minutes and zero time delays on action.
With its high overload, accuracy, isolation, safety, low power consumption and strong interference resistance ability, this device has been already widely used in industrial automation.
Series FCS AC Current Switch for Furison
The series FCS003 current switch was designed for monitoring AC. By sensing AC, this device controls AC load on motor, relay, lighting, fan, and applicably monitored circuit, together with contactor. Input passing through current rang 1.2-- 40A, and maximum voltage load up to 120V/2.5A. Delay module was Incorporated into the circuit for 5, 10, 15 minutes and zero time delays on action.
With its high overload, accuracy, isolation, safety, low power consumption and strong interference resistance ability, this device has been already widely used in industrial automation.
| Model: | FCS003 |
| Power-Supply: | None, self-powered |
| Amperage Range: | 1.2 to 40A continuous |
| Conduct Current: | 0.5±0.2A |
| Switch State: |
Normal Open |
| Output Rating: |
2.5A @ 120VAC |
| AC Load Frequency: | 10-200Hz |
| Hysteresis: | ≤ 1% |
| Accuracy: | 10% |
| Repeatability: | 100% |
| Power Consumption: | ≤ 1W |
| Response Time: | <200ms |
| Leakage Current: | ≤ 1mA |
| Temperature Limit: | 32 to 122℉ (0 to 50℃) |
| Humidity Limits: | 10 to 95% RH (none-condensing). |
| Enclosure Rating: | UL 94V-0 flammability rated ABS, insulation class 600V |
| Maximum Overload: | 200% (< 200% of the rated cross-core current) |
| Dimensions: | (47×100×28.5) mm |
Related Products
- Miniature Circuit Breaker
- UL489
- 1 pole
- Operating voltage: 277 V AC
- Current rating: 2 A
- SCCR: 10 kA
- Trip curve: C
- Reliable in the system: Type ∥ coordination
- Perfect system with peripheral devices
- No arc exposure via sealed structures
- One-touch connection with Din Rail
- Simple wiring with adapter, reversing wire set
- 4-terminal type: Easy wiring of operation coil
- Module type screw terminal
- Interlocking unit with built-in auxiliary contacts (2NO built-in)
- NACS Charging Cable 50A
- 7.62m Length
- Without UHF
- Compliant with SAE J1772, SAE J3400, UL2251
- NACS Charging Cable 80A
- 7.62m Length
- Without UHF
- Compliant with SAE J1772, SAE J3400, UL2251
- Accuracy is guaranteed over the whole operating temperature range
- Simplifies System Design - No additional signal compensation needed to gain the benefits of a very accurate sensor
- Efficient Data Acquisition - Network up to 89 units
- Works with existing and new systems 0-5V analog and either RS-232 or RS-485 digital output
- Optimizes Output - User-configurable pressure units, sampling, update rate
- Flags Problems - Internal diagnostics set flags, indicates errors
