The XM500 module is a configurable Input/Output (I/O) module designed to bring analog and digital inputs and output onto the SAE J1939 CAN
The XM500 is ideally suited to bring the additional information needed onto the J1939 CAN bus and can be configured to broadcast fault codes and activate digital outputs per input condition such as fuel level low, hydraulic oil temperature high, etc. Because the XM500 broadcasts information using the J1939 standard protocol, the information can be displayed using standard J1939 display modules, such as the PowerView® 101.
The XM500 module is a configurable Input/Output (I/O) module designed to bring analog and digital inputs and output onto the SAE J1939 CAN
The XM500 is ideally suited to bring the additional information needed onto the J1939 CAN bus and can be configured to broadcast fault codes and activate digital outputs per input condition such as fuel level low, hydraulic oil temperature high, etc. Because the XM500 broadcasts information using the J1939 standard protocol, the information can be displayed using standard J1939 display modules, such as the PowerView® 101.
| Power Input: | 8 to 28VDC |
| Communication Ports: | CAN J1939 |
| Operating Temperature: | -40°F to 185°F (-40°C to 85°C) |
| Digital Inputs: | 4 – Ground or battery positive activation |
| Digital Outputs: | 2 Sinking (500 mA) |
| Product Weight: | 10 ounces |
| Thermocouple Input: | Type K and Type J |
| Analog Inputs: | 1 – Battery Supply Voltage (dedicated) 7 – Configurable as 0-5VDC, 4-20mA, resistive senders3 or used as an additional digital input |
| Speed Sensing Input: | Magnetic pickup (2 to 120VAC RMS from 30 to 10,000 Hz) |
Related items
- For 12 and 24 Volt Operation
- Includes 12 digital inputs, 8 analog inputs and 12 outputs
- Robust, Sealed Enclosure with Cast Aluminum Base
- More Reliable Than Fuse and Relay Technology
- Cuts Wire Harness Costs
- Configurable Analog and Digital Inputs
- Start/Stop Control and Alarm Capabilities
- IP67 Sealed Enclosure
- CAN/J1939 Communications
- Program with PowerVision Configuration Studio®
