Products

Filter
View
Showing 225 - 256 of 293 Items
  • 1200A Continuous Duty
  • 1500V System Voltage
  • Hermetic Ceramic Seal with gas fill for superior carry and switching performance
  • Bi-Directional main contacts
  • Mechanically linked SPDT auxiliary contacts for accurate main position feedback
  • Meets RoHS 2011/65/EU
  • RoHS / REACH compliant
  • UL 60947-4 pending
Contact for Availability
  • Built-in switch for selection between steady and flashing mode
  • Mounting bracket allows convenient installation in case of XXX-FT type
  • Built-in buzzer available (Volume : Max. 90dB at 1m)
  • Flashing rate : 60-80 flashes/min
  • Materials : Lens - PC, Housing - ABS, Reflector - Heat resistant ABS, Mounting bracket - STS316L
  • Ambient operating temperature : -30°C to +50°C
  • Protection rating : IP44
  • PWR AC/12 VDC Converter
  • Mouser 173-0602-E Power Cable
  • 3' Male A-Male USB 2.0 Cable
  • Programming Harness
  • Ultra slim 15W footprint
  • Rugged, encapsulated design to resist environment
  • IP20 protection
  • Wide 20 to 72 Vdc input range
  • M3 screw clamp terminations
  • Simple snap-on for DIN Rail TS35/7.5 or TS35/15
  • Galvanic isolation
  • Five year limited warranty
  • Ultra slim 15W footprint
  • Rugged, encapsulated design to resist environment
  • IP20 protection
  • Wide 20 to 72 Vdc input range
  • M3 screw clamp terminations
  • Simple snap-on for DIN Rail TS35/7.5 or TS35/15
  • Galvanic isolation
  • Five year limited warranty
Contact for Availability
  • Latest MOSFET technology generation
  • Ultra low on-state resistance
  • New innovative isolated driver ensuring fast power transistor turn on and off therefore low power transient
  • Ultra low output leakage current
  • Low control current consumption
  • Triggered control input to avoid linear control risks
  • Low conducted and radiated disturbances
  • Latest MOSFET technology generation
  • Ultra low on-state resistance
  • New innovative isolated driver ensuring fast power transistor turn on and off therefore low power transient
  • Ultra low output leakage current
  • Low control current consumption
  • Triggered control input to avoid linear control risks
  • Low conducted and radiated disturbances
  • Ultra slim 15W footprint
  • No tools required for mounting
  • Adjustable output
  • PowerBoostTM industrial overload design
  • Overvoltage, short circuit protection
  • Continuous short circuit protection
  • Low output noise
  • Screw terminal connections
Contact for Availability
  • Ultra slim 15W footprint
  • No tools required for mounting
  • Adjustable output
  • PowerBoostTM industrial overload design
  • Overvoltage, short circuit protection
  • Continuous short circuit protection
  • Low output noise
  • Screw terminal connections
  • Recognized to UL 1778 standards (120V Models)
  • Suitable for UL508
  • Compact design in a rugged, industrially-rated enclosure
  • DIN Rail, shelf or panel mount
  • For wide temperature ranges, harsh environment
  • IP20-rated hardwire terminals for AC connections
  • Various self-diagnostics and alarm output
  • Easily removable, hot-swappable battery with integral pull tab
  • Overload, overcharge and fault protection in all modes
  • No internal fan, no extra cooling required
  • LED Status Indicators
  • Various communication option
  • Optional PCB conformal coating
  • Recognized to UL 1778 standards (120V Models)
  • Suitable for UL508
  • Compact design in a rugged, industrially-rated enclosure
  • DIN Rail, shelf or panel mount
  • For wide temperature ranges, harsh environment
  • IP20-rated hardwire terminals for AC connections
  • Various self-diagnostics and alarm output
  • Easily removable, hot-swappable battery with integral pull tab
  • Overload, overcharge and fault protection in all modes
  • No internal fan, no extra cooling required
  • LED Status Indicators
  • Various communication option
  • Optional PCB conformal coating
Contact for Availability
  • Mechanical life exceeds 20 million operations, owing to a 2-piece spring mechanism
  • High sensitivity
(M.D. = 0.1 mm)
  • Superior seal: oil-resistant/immersion-proof type (JIS) and IP67 (IEC). O-ring and integral diaphragm seal are built in ACE
  • Small, space-saving body can be tightly gang-
mounted
  • UL/CSA/CE/GB (CCC marking) - certified models are available (excluding some models)
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90℃ actuator positions
  • Horizontal or Vertical Operation
  • Easy to install
  • Global general standard
  • M12 aviation connector available
  • Cable bottom exit
  • Roller plunger with boot seal
  • 1 metre cable included
Contact for Availability
  • Easy to install
  • Global general standard
  • M12 aviation connector available
  • Side rotary with lever
  • Cable side exit
  • 2 metre cable included
  • Easy to install
  • Global general standard
  • M12 aviation connector available
  • Cable bottom exit
  • Roller plunger
  • 1 metre cable included
Contact for Availability
  • Easy to install
  • Global general standard
  • M12 aviation connector available
  • Cable bottom exit
  • Cross-roller plunger
  • 1 metre cable included
  • Easy to install
  • Global general standard
  • M12 aviation connector available
  • Side rotary with lever
  • Cable bottom exit
  • 3 metre cable included
  • Easy to install
  • Global general standard
  • M12 aviation connector available
  • Side rotary with lever
  • M12 connector side exit 4 pin
  • M12 4pin Connector included
  • Zn/Al body and steel lid
  • Global general standard
  • Mechanical movement and electrical line separates
  • Positive Opening Mechanism
  • 4×90° actuator position, omni-directional
  • Conform to EN 50047 standard
  • Contact form zb
  • Cable entry available:
 M 20,PG 13.5 and 1/2"PT
  • Metal reinforced body
  • Easily interchangeable contact block
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Cable entry: 1/2"NPT
  • Conform to EN 50047 standard
  • Roller Plunger - Slow Action - 2NC
  • Zinc die cast body
  • Increased wiring space
  • Earth grounding surface on same level as switching
  • Easily interchangeable contact block
  • Fine adjustment of switching point via adjusting screw
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Cable entry available: M20, PG13.5 and 1/2" NPT
  • Conform to EN 50041 standard
  • Zinc die cast body
  • Increased wiring space
  • Earth grounding surface on same level as switching
  • Easily interchangeable contact block
  • Fine adjustment of switching point via adjusting screw
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Cable entry available: M20, PG13.5 and 1/2" NPT
  • Conform to EN 50041 standard
  • Glass fiber reinforced plastic body
  • Easily interchangeable contact block
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Cable entry available: M20, PG13.5 and 1/2"NPT
  • Grounding Screw
  • Conform to EN 50047 standard
  • Glass fiber reinforced plastic body
  • Easily interchangeable contact block
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Cable entry available: M20, PG13.5 and 1/2"NPT
  • Grounding Screw
  • Conform to EN 50047 standard
  • Limit Switch
  • Glass fiber reinforced plastic body
  • Easily interchangeable contact block
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Conform to EN 50047 standard
  • Cable entry available: 1/2"NPT
  • Glass fiber reinforced plastic body
  • Easily interchangeable contact block
  • Galvanically separated contacts
  • Screw terminals with self-lifting clamps for easy wiring
  • Positive Opening of NC contacts
  • 4 x 90o actuator positions
  • Cable entry: 1/2"NPT
  • Conform to EN 50047 standard
  • Cross Roller Plunger - Snap Action - 1NO/1NC
  • Top Roller Lever Limit Switch
  • Glass fiber reinforced plastic body
  • Mechanical movement and electrical line separates
  • Positive Opening Mechanism
  • Double insulation
  • 4 x 90o actuator positions
  • Conform to EN 50047 standard
  • Contact form zb
  • Cable entry available: 1/2"NPT
Contact for Availability
  • Zero Cross Solid State Relay especially designed for resistive loads (AC-51)
  • Output 12 to 280VAC 25A
  • Large control range: 3 - 32VDC with input current limiter
  • Green LED visualization on the input
  • Input over-voltage protection
  • IP20 protection by removable flaps on terminals with optional labels
  • Zero Cross Solid State Relay especially designed for resistive loads (AC-51)
  • Back to back thyristors on output with TMS2 technology with a long lifetime expectancy: 24 to 600VAC 60A
  • Large control range: 3.5-32VDC with input current limiter
  • Green LED visualization on the input
  • Input over-voltage protection
  • IP20 protection by removable flaps on terminals with optional labels
  • Zero Cross Solid State Relay especially designed for resistive loads (AC-51)
  • Back to back thyristors on output with TMS2 technology with a long lifetime expectancy: 24 to 600VAC 90A
  • High I²t model > 6000A²s for MCB (Miniature Circuit Breaker) protection
  • Large control range: 3.5-32VDC with input current limiter
  • Green LED visualization on the input
  • Input over-voltage protection
  • IP20 protection by removable flaps on terminals with optional labels
  • Safe - an incorrect installation is virtually impossible
  • Easy - significantly shorter assembly and installation times
  • Economical - extremely high efficiency and good penetration of acoustical obstacles significantly reduce the required number of sounders