SDP3-15-100T
- Ultra slim 15W footprint
- No tools required for mounting
- Adjustable output
- PowerBoostTM industrial overload design
- Overvoltage, short circuit protection
- Continuous short circuit protection
- Low output noise
- Screw terminal connections
- Product SKU: SDP3-15-100T
- Category:New Products,Power Solutions
- Contact for high volume orders (25 or more) for special pricing
SDP™ Low Power DIN Rail Series
The compact, lightweight DIN Rail power supplies come in output voltages from 5 to 48 Vdc and power ratings of up to 100 Watts. These extra small, efficient units are designed specifically for the industrial environment. Each unit is rated from -10ºC to 70ºC, with no derating necessary until above 60ºC.
Many extra “industrial” features are standard for the SDP PowerBoostTM overload circuitry can start up industrial loads (i.e. motors, relays, solenoids and DC-DC converters), that can cause ordinary power supplies to foldback or shutdown. Each unit contains a DC indicator and front panel adjustment potentiometer. With the SolaHD SDP series, you can count on a high grade design.
SDP™ Low Power DIN Rail Series
The compact, lightweight DIN Rail power supplies come in output voltages from 5 to 48 Vdc and power ratings of up to 100 Watts. These extra small, efficient units are designed specifically for the industrial environment. Each unit is rated from -10ºC to 70ºC, with no derating necessary until above 60ºC.
Many extra “industrial” features are standard for the SDP PowerBoostTM overload circuitry can start up industrial loads (i.e. motors, relays, solenoids and DC-DC converters), that can cause ordinary power supplies to foldback or shutdown. Each unit contains a DC indicator and front panel adjustment potentiometer. With the SolaHD SDP series, you can count on a high grade design.
| Model: | SDP3-15-100T |
| Product Category: | DIN Rail Power Supplies |
| Input Type: | 1-Phase / Single Phase |
| Output Power: | 51 W |
| Input Voltage: | 85 VAC to 264 VAC |
| Number of Outputs: | 1 Output |
| Output Voltage-Channel 1: | 15 VDC |
| Output Current-Channel 1: | 3.4 A |
| Output Voltage-Channel 2: | - |
| Output Current-Channel 2: | - |
| Output Voltage-Channel 3: | - |
| Output Current-Channel 3: | - |
| Ripple / Noise: | <50 mVpp |
Related Products
- Reliable in the system: Type ∥ coordination
- Perfect system with peripheral devices
- No arc exposure via sealed structures
- One-touch connection with Din Rail
- Simple wiring with adapter, reversing wire set
- 4-terminal type: Easy wiring of operation coil
- Module type screw terminal
- Interlocking unit with built-in auxiliary contacts (2NO built-in)
- Ultra slim 15W footprint
- Rugged, encapsulated design to resist environment
- IP20 protection
- Wide 20 to 72 Vdc input range
- M3 screw clamp terminations
- Simple snap-on for DIN Rail TS35/7.5 or TS35/15
- Galvanic isolation
- Five year limited warranty
- Ultra slim 15W footprint
- Rugged, encapsulated design to resist environment
- IP20 protection
- Wide 20 to 72 Vdc input range
- M3 screw clamp terminations
- Simple snap-on for DIN Rail TS35/7.5 or TS35/15
- Galvanic isolation
- Five year limited warranty
- Precise and continuous measurement of the inclination of mobile machines
- Robust design for long service life: IP67 / IP69K protection class (ISO 20653)
- For different requirements, various connector variants can be adapted: Deutsch DT04-08PA / 1x M12 5-pin (male) / 2x M12 5-pin (male/female)
- Easy variant management due to smart modular system
- Thanks to efficient 2-point-mounting, installation is up to 30 % faster than with existing tilt sensors
- Familiar elobau sustainability through CO2-neutral production
