Products

Filter
View
Showing 193 - 224 of 293 Items
  • Mini MSD Receptacle with Shunt
  • No fuse needed, can directly use the terminal
  • A two-stage lever provides an HVIL time delay
  • 1 x integrated internal HVIL
  • Unique cooling structure
  • Dual-channel design lowers temperature rise
  • No tools required to unmate
  • Various fuse ratings
Contact for Availability
  • Three position operator : On-Off-Trip (Only 100AF is applied)
  • Complete range of common accessories
  • Handle lock in the Off position
  • Class 10 overload trip characteristics
  • Trip test
  • Finger safe terminal
  • Din rail & Screw mounting
  • Ready for IE3
  • Three position operator : On-Off-Trip (Only 100AF is applied)
  • Complete range of common accessories
  • Handle lock in the Off position
  • Class 10 overload trip characteristics
  • Trip test
  • Finger safe terminal
  • Din rail & Screw mounting
  • Ready for IE3
  • MSD Receptacle with Rear Mounting
  • MSD Plug with 250A Fuse
  • A two-stage lever provides an HVIL time delay
  • 2 x integrated internal HVIL
  • Unique cooling structure
  • Dual-channel design lowers temperature rise
  • No tools required to unmate
  • Various fuse ratings
  • Receptacle can be front or rear mounted
  • Overload relay for motor protection
  • Screw terminals
  • Auxiliary contacts 1 x NO/NC
  • Manual/Automatic reset
  • Innovative LED light with high signaling effect
  • Suitable for indoor and outdoor use
  • Extremely insensitive to shock and vibration
  • 3 selectable operating modes as standard:
    • - Continuous light
    • - Blinking light
    • - Flashing light
  • 24 V AC/DC devices as standard with Soft Start Module
  • Double-pole terminal
  • Inexpensive and flexible; wide range power supplies as standard
  • Innovative LED light with high signaling effect
  • Suitable for indoor and outdoor use
  • Extremely insensitive to shock and vibration
  • 3 selectable operating modes as standard:
    • - Continuous light
    • - Blinking light
    • - Flashing light
  • 24 V AC/DC devices as standard with Soft Start Module
  • Double-pole terminal
  • Inexpensive and flexible; wide range power supplies as standard
  • The industrial sounder for tough applications
  • For use as an acoustic alarm in potentially explosive workplaces of category 3G (Zone 2) and 3D (Zone 22)
  • Category for gas and dust protection
  • IP 67 for safe operation under extreme environmental conditions
  • Individual selection of 32 different tones
  • 4-stage external tone selection (options: TAS, TAV)
  • All tones can be individually combined with one another when externally controlled (programming function, tone 32)
$1,188.88
  • Precise and continuous measurement of the inclination of mobile machines
  • Robust design for long service life: IP67 / IP69K protection class (ISO 20653)
  • For different requirements, various connector variants can be adapted: Deutsch DT04-08PA / 1x M12 5-pin (male) / 2x M12 5-pin (male/female)
  • Easy variant management due to smart modular system
  • Thanks to efficient 2-point-mounting, installation is up to 30 % faster than with existing tilt sensors
  • Familiar elobau sustainability through CO2-neutral production
  • 7-inch full color glove-friendly touchscreen
  • Open platform operating system allowing users to utilize a wide array of developer tools
  • Essential display features at an unprecendented value
  • Powered by the Next Display Platform
  • Matched O-T Terminal for HVPTM2A04
  • 2pcs Required Per Connector
  • Matched O-T Terminal (70MM^2) for HVPTM2A03
  • 2pcs Required Per Connector
  • Holder for Plug SAE Combo Vehicle Connectors Thermoplastic
  • HVSL362 Power Contact for Plug
  • 16mm²
  • Stamped
  • HVSL362 Power Contact for Receptacle
  • 16mm²
  • Stamped
Contact for Availability
  • Safe – an incorrect installation is virtually impossible
  • Easy – significantly shorter assembly and installation times
  • Economical – extremely high efficiency and good penetration of acoustical obstacles significantly reduce the required number of sounders
  • Pre-wired sounder and light ex works
  • Various light intensities available to support best match of audible and visual coverage
Contact for Availability
  • Configurable Analog and Digital Inputs
  • Start/Stop Control and Alarm Capabilities
  • IP67 Sealed Enclosure
  • CAN/J1939 Communications
  • Program with PowerVision Configuration Studio®
Contact for Availability
  • Optically-bonded 5-inch LCD designed for harsh environments
  • High-brightness screen for full sunlight viewability
  • Glass display surface offers enhanced clarity and strength
  • Glove-friendly touch panel
Contact for Availability
  • 7-inch display with IP69K-rated enclosure for harsh environments
  • Glass display surface offers enhanced clarity and strength
  • Optically-bonded, high-brightness screen for full sunlight viewability
  • Connect four video inputs and watch two feeds simultaneously
  • Glove-friendly touchscreen
Contact for Availability
  • 4.3-inch color display capable of rich, color graphics
  • Fully featured standard software ready for Tier 4 and Stage V engines
  • Optically-bonded glare-free LCD screen for superior visibility in sunlight
  • Customizable I/O with RS485 serial connection
  • 5 tactile configurable soft keys
$1,603.97
  • Accuracy is guaranteed over the whole operating temperature range
  • Simplifies System Design - No additional signal compensation needed to gain the benefits of a very accurate sensor
  • Efficient Data Acquisition - Network up to 89 units
  • Works with existing and new systems 0-5V analog and either RS-232 or RS-485 digital output
  • Optimizes Output - User-configurable pressure units, sampling, update rate
  • Flags Problems - Internal diagnostics set flags, indicates errors
$3,665.61
  • Wiring Harness for the PV485
  • Loose Leads
  • 24 inches
  • Safe – an incorrect installation is virtually impossible
  • Easy – significantly shorter assembly and installation times
  • Economical – largest possible signaling range due to effective Xenon technology
  • Installation options with external lugs or internal holes
  • Choice of 4 different flash rates via DIP switch
  • Electronic constant current regulation at 24 V AC/DC devices to avoid load fluctuations
  • Integrated inrush current limitation and undervoltage detection
  • Providing full synchronisation on multi-flashing light systems
  • Light and sounder can be controlled separately
  • Helps reduce the costs of installation by reducing the space needed to emit seven color signals in a single warning light
  • Milky translucent color when off, the soft LED illuminates designated colors when on
  • Built-in buzzer available (Volume : Max. 80dB at 1m)
  • Ambient operating temperature : -30°C to +50°C
  • Protection rating : IP65
  • Certificates : CE Compliant
  • Compliant with RoHS directive
  • Helps reduce the costs of installation by reducing the space needed to emit seven color signals in a single warning light
  • Milky translucent color when off, the soft LED illuminates designated colors when on
  • Built-in buzzer available (Volume : Max. 80dB at 1m)
  • Ambient operating temperature : -30°C to +50°C
  • Protection rating : IP65
  • Certificates : CE Compliant
  • Compliant with RoHS directive
  • Excellent oil resistance with a special sealing structure with IP67 protection rating, suitable for machine tool applications with cutting fluids
  • Suitable for high pressure and high temperature water cleaning environments(IP69K)
  • Tempered glass prevents damage from machine tool chips
  • Foreign substances do not accumulate on the shielding glass surface of the working light due to its flush structure to the housing structure oft he product
  • Can select from a variety of bracket options from direct mount, tilt mount, and pan/ tilt mount type to fit your work environment or lighting condition needs
  • Equipped anti-glare filter
  • Suitable for environments that require stable intensity illumination for improved visibility
  • Standard entry cable included. Can customize the product with the M12 connector if requested
  • Customized oil resistant cable attached type available
  • Excellent oil resistance with a special sealing structure with IP67 protection rating, suitable for machine tool applications with cutting fluids
  • Suitable for high pressure and high temperature water cleaning environments(IP69K)
  • Tempered glass prevents damage from machine tool chips
  • Foreign substances do not accumulate on the shielding glass surface of the working light due to its flush structure to the housing structure oft he product
  • Can select from a variety of bracket options from direct mount, tilt mount, and pan/ tilt mount type to fit your work environment or lighting condition needs
  • Equipped anti-glare filter
  • Suitable for environments that require stable intensity illumination for improved visibility
  • Standard entry cable included. Can customize the product with the M12 connector if requested
  • Customized oil resistant cable attached type available
  • By using the horn cover as a light globe, the size of the product has been reduced significantly
  • Easy device customization with built in sound selection function, volume adjustment function and an SDcard slot for user inputted tones
  • 31 available tones that can be selected for a variety of environments
  • The user can select their own tones by inputting the MP3 file directly into the SDcard
  • 31 pre-recorded tones available via binary input
  • Suitable for use in environments that require a tight seal and superior dust protection rated IP66
  • Can be used in extreme environmental conditions such as the arctic where temperatures can reach -50°C
  • Flashing rate : 60-80 flashes/min(steady/flashing mode selection available in built in switch)
  • Materials : Horn-PC, Body-PC+ABS
  • Ambient operating temperature:
    -30°C to +60°C(Standard)
    -50°C to +60°C(Low temperature type only DC)
    -20°C to +50°C(SD Card type)